Motul 300V2 Factory Line 10w50 4-Takt Olie 1L

OFF ROAD USE BENEFITS - INCREASED TORQUE - Low oil film traction at low revolution speed

Torque improvement above 1% against a 15W-60 used as reference oil measured on Honda 450 CRF engine mounted on the dynamometer. Motul 300V² 4T Factory Line 10W-50 increases the torque allowing faster acceleration and better control of the bike. - INCREASED CLUTCH GRIP - Optimized friction control. The JASO T903 test evaluate the frictional performance of the clutch and fluid combination over a wide speed range. Motul 300V² 4T Factory Line 10W-50 showed 2.3 % of friction improvement against a competitor 10W-50 used as reference oil thus allowing better motricity and traction control in tough riding conditions. - INCREASED GEARBOX RELIABILITY - High shear stability of the oil film. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Motul 300V² 4T Factory Line 10W-50 based on an innovative anti-wear additives package showed very strong shear stability and protection performance with only 0.26% of pitting on one gear tooth out of 16 after the 300 Hours run at 3000 rpm.

Color Visual Amber Viscosity grade SAE J 300 10W-50 Density at 20°C (68°F) ASTM D1298 0.871 Viscosity at 40°C (104°F) ASTM D445 107.5 mm²/s Viscosity at 100°C (212°F) ASTM D445 17.7 mm²/s Viscosity Index ASTM D2270 182.0 Pour point ASTM D97 -36.0 °C / -32.8 °F TBN ASTM D2896 9.5 mg KOH/g